The Core!

The Core is an important part of the rhomb.io system.

The first system in the world that allows you change processor between different manufacturers, allowing to you and your product choose the way you want to go.

is a module tha provides the system engine and the power to alow your device work and run any advanced operative System.
All the core’s can be compatible with

socket400 (S400)/socket 500 (S500) /socket 600 (S600)

The socket only determine the quantity of signal available in the core, including Comunication BUS and power.

always a team with 2 players, Silicon processor and a configurable power management (PMIC) with MCU.
The powerfull of the PMIC can drive 23A Max.
Upt to 24 x LDO and 9 x BUCS from 0v8 to 3v4.

2 X Bucks Configurable from 1v0 to 3v4 max 1500mah Version
Free Use Power Sources

15 x LDO From 1v0 to 3v3 from 150mah to 300 mah

Rhomb Only Accesible to fit Standar Power Source

7 x LDO from 0v2 to 3v4 up to 300mah

This PMIC has an full dedicated MCU to drive the power sources from it or from CPU. It can be programed by user under his own risk.

the core provides to the user a lot of standar interfaces like:

USB 2.0
USB 3.0
HSIC
MIPI/DSI and CSI
SATA
PCI-Ex
I2C
I2S
UART
SPI
PWM
XE-INT
GPIO
SDIO 2.0/3,0
RGMII
HDMI
LVDS
RGB
ADC
JTAG
DDR
SMBUS
CAN

All this standar are provided by the Proccessor manufacturer inside the silicon. and not all the procesors have the same conectivity.

 

 

By | 2017-03-08T13:26:29+00:00 March 8th, 2017|Categories: General, Rhomb.io|0 Comments